Double Glazing Lock Repairs

A good quality lock on your windows and doors helps to prevent burglars from gaining access to your home. They don't usually like breaking glass or trying to squeeze through windows.

Some owners of double glazing, however, have experienced problems with their door or window lock after installing. These problems can often be resolved without the need for a new double glazing.

Broken or damaged locks

If your uPVC window or door lock is broken or faulty and requires a locksmith, they can fix it for you. They will be able to repair the striker plates, hinges and locks on your double-glazed. They can also move the cylinder to fix any misalignment which could be causing your handle not to function properly.

If the key fits in the lock but it won't turn or is difficult to insert, the mechanism might be locked up. Grease or dirt can be trapped in the mechanism. If this is the case, it may be possible for the lock to be cleaned and lubricated. It is essential to use a dry lubricant, such as teflon or graphite instead of oil, which can attract dirt and stick to the interior of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant must work its way into the mechanism, and the lock should spin easily.

The loose screws inside the lock mechanism are a different reason for a broken lock. They can loosen and fall out or break completely, preventing the lock from working properly. A screwdriver can be used to tighten these screws but caution must be taken not to over-tighten them because this could damage the internal components.

A broken lock can be hazardous for you and your family. This is especially relevant if you have young children. It is possible for them to unlock the door without your knowledge, and this can allow them access to your home. If you're worried that this might happen, a vetted professional locksmith can help you re-secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on uPVC doors and windows. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always required.

Broken or Faulty Handles

Many double-glazed windows have a multi-point lock as a part of the overall security package. This is an excellent option for those worried about potential thieves who may try for ways to gain access to your home. Ask your locksmith about antilift blocks. They can be put in alongside your existing locks and will help keep your windows firmly closed.

It's not uncommon for the handle locks to get damaged or even fail - they are the first component of your window to be forced open by criminals who want to break in. The good news is that this is among the easiest parts to fix.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette which is designed to withstand forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installation. Older style uPVC and aluminium handles can be upgraded to lock bolts that shoot, again as an optional feature on all new double-glazed windows.

It is essential to fix a handle as soon as possible after it has been damaged. The damaged handles could stop the window from closing properly and permit drafts to get more info in. It may be a weakness that burglars who are opportunistic could exploit, therefore putting your belongings and family at risk of being stolen.

The process of fixing the damaged mechanism begins with getting access to the window frame and removing the broken handle. The gearbox that opens the handle is removed and the type of gear is identified so a replacement can be sourced which matches the profile of internal window frame mechanisms.

After the mechanism has been replaced the handle can be re-attached with the original screws - however, we generally recommend replacing them with more long screws as this will give the most secure fit. The final step is to seal the handle with an opaque sealant. This will help protect it from further corrosion. After that the window will be fully operational again, and at a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows do not close properly, you read more may be experiencing draughts, the weakening of your home's security, and an increased risk of damp or water damage. Broken or faulty window hinges are a common issue that can be fixed easily.

If your windows made of uPVC won't close or open and close, it's likely the hinges need to be replaced or repaired. While a lot of window companies require you to purchase a whole new window to resolve this simple issue, we're able to replace the hinges that are damaged and save you money.

Window hinges can be damaged through repeated use, or weakening over time due to corrosion. In the event of a damaged hinge, it is important to take measures to prevent further damage by being careful not to force the window open or closed.

You can locate the appropriate parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all window hinges. It's best to consult an expert in this regard to ensure that you don't make the mistake of purchasing parts that are not compatible with your existing hardware and could cause further damage.

Faulty hinges are a major issue for uPVC windows and doors. They can be a major source of noise and can also permit water to infiltrate your windows.

To resolve this issue, first verify whether the pin barrel on both hinge halves is aligned. If it isn't, tap the headpin with the hammer to create a slight bend in hinge barrel. This will help keep the pin in the right position. Then, ask a friend to hold the door as you remove the hinges and hinges from both the doorjamb and the more info door. Replace the hinges with ones that are the same size and attach the screws using glue. Finally, while the glue is drying, put a secure hold on the hinges by using weights or clamps.

After your hinges have been repaired, you should be able to install the door and then reattach the handle. Replace the screws with wood dowels of the same length as the screw that was used to ensure that they are compatible.

Broken or damaged glass

While uPVC windows do a great job of keeping cold out and heat in, they can become damaged over time. This can be the case with broken or damaged glass as well as faulty locks. If not taken care of, it can be a costly problem. This can also detract from your home's aesthetics and double glazing company near me result in here a decrease in insulation. It is essential to fix any damage as soon as it occurs.

You can fix your cracked glass yourself if you have the proper tools and techniques. First, make sure the area around the glass is free of debris to ensure that any shards do not harm anyone and aren't a trip hazard. Remove any broken glass pieces and dispose of them in the appropriate way. Apply masking tape across the entire area. This will prevent glass shards from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window it's best to pre-fit the pane of glass before gluing it back into place so that you know you'll have enough room to complete the task.

Before applying the glue, clean the surface of the broken frame and the glass with a dry, clean cloth. Follow the directions for application and curing times that can differ from one product to the next. You may need to clamp the glass that has cracked using clamps that are lightweight and designed to hold fragile materials, depending on the angle.

Once the adhesive has fully cured, carefully install the glass inside the window frame. Make sure it's aligned with the frame's edge and that there aren't any gaps between the glass sash as well as the frame. Be careful to avoid flexing the window as it's being reinstalled, as this can weaken the seal and cause water infiltration and condensation.

If you have a glass window that is broken completely or has bigger cracks, contact an experienced professional glazier such as O'Brien(r) to organise the replacement. It's essential to act swiftly in the event of broken glass.